Pictures of Arduino devices made in 2012 (12 pictures)

I got an Arduino microprocessor in May, and this album documents some of the Arduino devices I made in 2012. Mostly this will be a collection of wiring setups, etc. to share with others.

The copyright owner on these pictures is Michael Meissner. Please direct any comments about this web page to mrmweb@the-meissners.org.

Michael Meissner's home page is at http://www.the-meissners.org, his Renaissance Faire/SF convention links are at http://www.the-meissners.org/ren.html, his digital camera links are at http://www.the-meissners.org/camera.html, his calendar links are at http://www.the-meissners.org/calendar.html, and the head of these photo albums is at http://www.the-meissners.org/photo.html.

The thumbnail pictures displayed here are have been reduced to at most 400x300 or 375x500 pixels depending on the picture orientation.

Clicking on the small file link will show you the picture that has been reduced to at most 846x600 or 773x1000 pixels depending on the picture orientation. If you click on the thumbnail you will get the small picture.

Fullsize pictures are not stored in this web site due to file size limiations. Please contact Michael Meissner if you desire a full size picture, particularly for printing.

This page lists pictures with thumbnails classified by grouping like subjects together. If you want to view the pictures arraigned from newest to oldest, click here. If you want to view the pictures without thumbnails, click here.

Picture sublinks

Picture #1: Arduino servo shutter release, May 6, 2012
Arduino servo shutter release, May 6, 2012
800x623, 100,529 bytes (99K), (html file)
Copyright, Michael Meissner 2012, All rights reserved
Olympus C-2100UZ camera
f/2.8, ISO 100, flash, 1/60 sec, 13.4mm, auto mode, SHQ, cloudy, matrix metering
35mm equivalent focal length 74.0mm
Programs used: crop, raw therapee
Taken by Michael Meissner on May 06, 2012 18:07:51
Last modified on May 06, 2012 at 19:40 		Picture #2: Arduino servo shutter release, May 6, 2012 #2
Arduino servo shutter release, May 6, 2012 #2
600x846, 55,081 bytes (54K), (html file)
Copyright, Michael Meissner 2012, All rights reserved
Olympus C-2100UZ camera
f/2.8, ISO 100, flash, 1/100 sec, 24.2mm, auto mode, SHQ, cloudy, matrix metering
35mm equivalent focal length 134.0mm
Programs used: crop, raw therapee, rotate left
Taken by Michael Meissner on May 06, 2012 18:19:38
Last modified on May 06, 2012 at 19:40
Picture #3: Arduino with 4N26JP opto-isolator
Arduino with 4N26JP opto-isolator
1000x773, 188,265 bytes (184K), (html file)
Copyright, Michael Meissner 2012, All rights reserved
Olympus E-5 camera with Olympus 14-54mm f/2.8-3.5 lens
f/8.0, ISO 200, flash (+0.3 flash compensation), 1/60 sec, 23.0mm, aperture priority, vivid color, matrix metering, image stabilization
35mm equivalent focal length 46.0mm
Extra equipment used: pop-up flash
Programs used: crop, raw therapee
Taken by Michael Meissner on July 16, 2012 08:24:53
Last modified on July 16, 2012 at 08:49 		Picture #4: 4N26JP setup
4N26JP setup
1000x773, 182,440 bytes (179K), (html file)
Copyright, Michael Meissner 2012, All rights reserved
Olympus E-5 camera with Olympus 14-54mm f/2.8-3.5 lens
f/8.0, ISO 200, flash (+0.3 flash compensation), 1/60 sec, 42.0mm, aperture priority, vivid color, matrix metering, image stabilization
35mm equivalent focal length 84.0mm
Extra equipment used: pop-up flash
Programs used: crop, gimp, raw therapee
Taken by Michael Meissner on July 16, 2012 08:25:48
Last modified on July 16, 2012 at 09:02
Picture #5: Setup for 4 element relay module
Setup for 4 element relay module
1000x773, 197,698 bytes (194K), (html file)
Olympus E-5 camera with Olympus 14-54mm f/2.8-3.5 lens
f/3.1, ISO 200, flash (+0.3 flash compensation), 1/60 sec, 28.0mm, auto mode, vivid color, matrix metering, image stabilization
35mm equivalent focal length 56.0mm
Extra equipment used: pop-up flash
Programs used: crop, gimp, raw therapee
Taken by Michael Meissner on July 17, 2012 23:56:08
Last modified on July 18, 2012 at 08:10 		Picture #6: Setup for 4 element relay module #2
Setup for 4 element relay module #2
1000x773, 183,930 bytes (180K), (html file)
Olympus E-5 camera with Olympus 14-54mm f/2.8-3.5 lens
f/3.1, ISO 200, flash (+0.3 flash compensation), 1/60 sec, 28.0mm, auto mode, vivid color, matrix metering, image stabilization
35mm equivalent focal length 56.0mm
Extra equipment used: pop-up flash
Programs used: crop, gimp, raw therapee
Taken by Michael Meissner on July 17, 2012 23:56:41
Last modified on July 18, 2012 at 08:15
Picture #7: Breadboard adhesive too strong
Breadboard adhesive too strong
800x623, 62,338 bytes (61K), (html file)
Copyright, Michael Meissner 2012, All rights reserved
Olympus E-5 camera with Olympus 14-54mm f/2.8-3.5 lens
f/8.0, ISO 200, flash (+0.3 flash compensation), 1/60 sec, 14.0mm, aperture priority, vivid color, matrix metering, image stabilization
35mm equivalent focal length 28.0mm
Programs used: crop, raw therapee
Taken by Michael Meissner on July 27, 2012 11:08:31
Last modified on July 27, 2012 at 11:29
I used the adhesive backing on the tiny breadboard, and then wanted to move it. The adhesive was too strong, and it ripped off the bottom of the breadboard. 		Picture #8: Inside of a breadboard
Inside of a breadboard
800x623, 60,906 bytes (60K), (html file)
Copyright, Michael Meissner 2012, All rights reserved
Olympus E-5 camera with Olympus 14-54mm f/2.8-3.5 lens
f/2.8, ISO 1000, 1/60 sec, 14.0mm, auto mode, vivid color, matrix metering, image stabilization
35mm equivalent focal length 28.0mm
Programs used: crop, raw therapee
Taken by Michael Meissner on July 27, 2012 11:09:21
Last modified on July 27, 2012 at 11:30
Picture #9: Inside of a breadboard #2
Inside of a breadboard #2
800x623, 70,021 bytes (69K), (html file)
Copyright, Michael Meissner 2012, All rights reserved
Olympus E-5 camera with Olympus 14-54mm f/2.8-3.5 lens
f/2.8, ISO 1250, 1/60 sec, 17.0mm, auto mode, vivid color, matrix metering, image stabilization
35mm equivalent focal length 34.0mm
Programs used: crop, raw therapee
Taken by Michael Meissner on July 27, 2012 11:11:00
Last modified on July 27, 2012 at 11:30 		Picture #10: Arduino telegraph key shutter release
Arduino telegraph key shutter release
900x623, 142,665 bytes (140K), (html file)
Copyright, Michael Meissner 2012, All rights reserved
Olympus E-5 camera with Olympus 14-54mm f/2.8-3.5 lens
f/5.6, ISO 200, flash (+0.3 flash compensation), 1/60 sec, 37.0mm, aperture priority, vivid color, matrix metering, image stabilization, noise reduction auto
35mm equivalent focal length 74.0mm
Extra equipment used: pop-up flash
Programs used: crop, gimp
Taken by Michael Meissner on August 05, 2012 23:36:30
Last modified on August 05, 2012 at 23:49
Picture #11: Arduino telegraph key shutter release #2
Arduino telegraph key shutter release #2
900x623, 119,538 bytes (117K), (html file)
Copyright, Michael Meissner 2012, All rights reserved
Olympus E-5 camera with Olympus 14-54mm f/2.8-3.5 lens
f/5.6, ISO 200, flash (+0.3 flash compensation), 1/60 sec, 52.0mm, aperture priority, vivid color, matrix metering, image stabilization, noise reduction auto
35mm equivalent focal length 104.0mm
Extra equipment used: pop-up flash
Programs used: gimp
Taken by Michael Meissner on August 05, 2012 23:36:46
Last modified on August 06, 2012 at 00:31 		Picture #12: Arduino telegraph key shutter release #3
Arduino telegraph key shutter release #3
986x777, 79,215 bytes (78K), (html file)
Created with Fritzing tool
No EXIF information available
Programs used: gimp
Taken by Michael Meissner
Last modified on August 06, 2012 at 23:58

Picture sublinks


Michael Meissner, mrmweb@the-meissners.org